Showing posts with label Baby's Breath Tutorial. Show all posts
Showing posts with label Baby's Breath Tutorial. Show all posts

Monday, July 20, 2015

Susan's Garden Rose with Baby's Breath Tutorial

ECD-SGDT-July-2015

Today my project is designed for Susan's Design Team project on the Elizabeth Craft Designs Blog.  I love to create any flower with Susan's dies, but one of my favorite is her rose.  Once created, they are so realistic you can almost smell them.  Susan has three different rose die sets.

This rose was created with Susan's Garden Rose 1 dies, which is the largest rose.  It was die cut using white card stock then colored using Tattered Rose Distress Ink.  A drop of the refill ink was placed on the Teflon Craft mat and water added to dilute the ink.  Some of the petals were dipped in the ink, especially the petals used for the center of the rose and the rose buds.  The rose buds were created with two of the largest rose petals.

ECD-SGDT-July-2015-Rose

 I love to add Baby's Breath with Roses.

ECD-SG-July-2015-Tut1

To create Baby's Breath, die cut the Berry Branch.  The die cut branch is seen on the left.  You can use the whole branch, but I cut off a portion of the bottom so it wasn't too high behind the rose.

Die cut a lot of the little flowers from the Country Scapes - Flora 1 die.  The flower die used is shown on the upper right corner in picture.

Shape each little flower by pressing down in the center, on the Flower Molding Pad, with the smallest stylus from Susan's Flower Tool Set, to give them shape.

ECD-SGDT-July-2015-Tut4 
Start gluing the little flowers to the "berry circle" on the Berry Branch.  I used the self-closing tweezers from the Flower Tool Kit to pick up the tiny flowers, dipped them in glue, and pressed them down in the center with the tip of the leaf tool from the Flower Tool Kit.
 
ECD-SGDT-July-2015-Tut5

Glue more little flowers on the stem of the Berry Branch, filling in all the open spaces.  Next, let the glue dry so the flowers don't slip around.

ECD-SGDT-July-2015-Tut-5
Glue additional little flowers over, and on sides, of the branch until you have a very full looking baby's breath branch.

ECD-SGDT-July-2015

Die cut the Paris Edge on a 6x6 piece of card stock.

Emboss the Paris Edge die cut using the Spring Leaves Embossing Folder.  Attach it to a 6x6 inch card front, with the lacy side toward the bottom of the card.

Die cut banner, seen at the top of the card, using the Agatha Edges dies.

Die cut the hearts and the small ovals using the Accordion Oval Card die set.  The hearts and two largest ovals were colored the same as the rose, using Tattered Rose Distress Ink.  Attach the two ovals together with dimensional tape, and glue to card.

The Sunshine and Love sentiment was stamped using black ink on white card stock then cut out with scissors.  It was glued to the card between the ovals.

Die cut the Small Butterfly.  The solid butterfly was colored with Tattered Rose Distress Ink, then the white lacy butterfly attached on top.

I hope you have fun creating Baby's Breath for your Susan's Garden Roses!
 
Products Used from Elizabeth Craft Designs:




Monday, August 20, 2012

Build A Flower Baby's Breath


I caught a nasty cold since coming home from our trip.  Seems this is so easy to do when you fly - at least it happened after we got home!  I know you are anxious to see more of the Build A Flower #2 components so this is the card I created for you today. 

Other flowers you can create with the new Cheery Lynn dies are roses, rosebuds, and baby's breath.  The largest flower petals on the Build A Flower "B187" die were used for the rose and the largest 5-point flower base from "B188" Embellishment die.  The rose was made by creating  5 separate layers, then they were all stacked. Once the rose was completed, I sprayed it with Perfect Pearls Mist "Pink Gumball" to give it a shimmer.  I used red card stock but love how the pink Perfect Pearls show up on the red.    I prepared a  tutorial on how to build a rose in a previous blog post so to keep this post short, I didn't do another one.  I used punches in my old tutorials but the same steps are taken using the die cut petals.  The rosebuds were made by using one of the elongated petals, and 5 or 6 small flower petals from the "B187" BAF plate.  The number of petals you use will depend on how large you want your rosebud. This set also contains the rose stem and rose leaves.   Below I will show you how I created the baby's breath.  The doily used for the rose is one of the Spellbinders "Romantic Rectangles".  The beautiful sentiment is from the new JustRite "Just The Right Words" design by Becca.  There are many, many beautiful sentiments in this set. 

 I like to die cut my baby's breath stem using white card stock then lightly sponge it with "Scattered Straw" Distress Ink.  

 In this picture I have die cut two stems and die cut the little flowers four times.  You can add as many of the little flowers to the stem as you like.  I like to add a lot so that is why I die cut it twice for each stem.  You will need tweezers and glue.  I like to use the self-closing tweezers from the Flower Tool Kit and "Glue N' Seal" for the adhesive.  To make your little flowers realistic, be sure to push down on the shaping mat,in the very center of each flower, with a small stylus. This will "cup" each flower.  When you put these little flowers on the mat to shape, don't worry about which side is up - it won't make a difference.

It isn't necessary, but I like to brush the Glue n' Seal over the branch, then I also put a little amount on my Teflon Craft Mat.  After brushing the glue over the stem, I pick up a little flower with the tweezers, then dip the back of it into the glue on the mat, then place it on the stem.  I usually press it down with a very small stylus to be sure it sticks.  You can just add a little glue to the back of the flower and not put glue over the entire stem, but I feel I get a better "connection" when they are double glued.  I work on the Teflon Craft Sheet and let the stem dry before pulling it up.  Once dry, it will pull right off.

Here you can see how I start adding the flowers to the stem.

In this picture you can see I brushed glue over the stem, and you can see the little dab of glue on the right side I dip each flower into before adding it to the stem.  You can add as many flowers as you want, depending on how full you want your baby's breath.  I like to fill the stem, then go back and add more to fill in any open spaces.  Each sprig will turn out a little different depending on the placement of the flowers.  This is great because you don't want them all to be identical. 

 Here is a closeup of the baby's breath on this card.  I am very excited about this part of the new Build A Flower #2 dies because I have always wanted this extra filler, especially when I create cards with roses.  I hope you like it as much as I do!

Cheery Lynn "Build A Flower #2" (B187)
Cheery Lynn "Build A Flower #2 embellishments (B188)
JustRite "Just the Right Words" sentiments stamp set (AG04015)
Spellbinders "Romantic Rectangles (S5-090)
Perfect Pearls Mist "Pink Gumball"
Distress Ink "Scattered Straw"
Glue N' Seal adhesive (the small bottle has a brush on the lid)
Flower Tool Kit
Teflon Craft Mat

LinkWithin

Related Posts with Thumbnails